Products
With over 3 million seals carried in our UK stocks we are sure to be able to provide a suitable solution.
Due to the large variety of styles and materials we offer it is impossible to list information for everything here! Listed below you will find some very brief information regarding the more popular styles and materials we offer.
Further information and technical drawings can be provided upon request. For further information, please call one of our sales team on 0151 652 6661 or email sales@actionseals.co.uk.
Rubber Covered
SC/R21/A
Single Lipped
TC/R23/AS
Double Lipped
SCI/R21/DPSM
Single Lipped Bi-Directional Helix
TCI/R23/DPFA
Double Lipped Bi-Directional Helix
VC/R26/AO
Single Lipped Springless
KC
Double Lipped Springless
TC4/CC4/Fork Seal
Motorcycle Fork Seal
DC/CK4/DUO
Double Lipped Double Sprung
Metal Cased
SB/R4/B
Single Lipped
TB/R6/BS
Double Lipped
SBI
Single Lipped Bi-Directional Helix
TBI
Double Lipped Bi-Directional Helix
VB
Single Lipped Springless
KB
Double Lipped Springless
TB4
Motorcycle Fork Seal
Materials
Nitrile Rubber (NBR)
NBR is the most commonly used material.
It has good heat resistance properties, good resistance to oils, salt solutions, hydraulic oils and petrol.
Operating temperatures are recommended from -40 to 120 *C.
Fluorinated Rubber (Vi)
Fluorinated rubber is widely known under the du Pont trade name VITON.
It has the best resistance to chemicals together with superior performance to high temperatures.
Operating temperatures are recommended from -30 to 200 *C.
Silicone Rubber (SI)
Silicone compounds are unsurpassed in its resistance to heat and low temperatures. The high lubricant absorbency of silicone minimises friction and wear. It is usually used for crank shaft seals.
Silicone has poor hydrolysis resistance and should not be used in oxidized or hypoid oils.
Operating temperatures are recommended from -50 to 180*C.
Polyacrylate Rubber (PA)
Acrylic rubber has a better heat resistance than Nitrile rubber.
It is recommended for high surface speed environement.
It should not be used with water.
Operating temperatures are recommended from -20 to 150*C.
We also carry HNBR and Teflon seals amongst our stocks. Other materials are available upon request. Please contact a member of our sales or technical team for further information.
